Results 1 to 3 of 3

Thread: Other post processors

  1. #1
    Join Date
    May 2014
    Location
    Orlando, FL
    Posts
    19

    Default Other post processors

    I have PartWorks 3.5 and I need to be able to use a different Post Processor than SBP. Is there a way to install different PPs without having to pay $500 to upgrade to Vcarve pro?

  2. #2
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,221

    Default

    The reason you are able to get a discounted rate on the SB version of the software is because it only supports ShopBots!
    To upgrade the current version of ShopBot VCP to be able to run other brands post processors is a $500 fee.
    SG

  3. #3
    Join Date
    May 2014
    Location
    MA
    Posts
    434

    Default

    Depending on what you're doing you can either upgrade, or take a look at Fusion 360. It's free if you're a hobbyist. It's more meant for metal mills, but it's got some pretty incredible toolpathing in it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •