Results 1 to 5 of 5

Thread: Very Happy with Shopbot...

  1. #1
    Join Date
    Nov 2016
    Location
    New Mexico
    Posts
    88

    Default Very Happy with Shopbot...

    Thanks a bunch to the Shopbot team and their great machines. We have ran our Desktop almost non-stop every day for the past two years. It is a work horse!

    Also need to thank the gurus on this forum. Thanks so much for contributing your expertise. You guys have made the learning curve much shorter for many of us. (I need to get around to finally reading the Manual.)

    It took a full two years but we've been able to pay for the Desktop two times over with our production.

    We will be purchasing a second Desktop this year.
    Whiskey2.jpgGanados.jpgJesus-2.jpgwinebarrel.jpg
    Last edited by woodshop; 01-01-2019 at 10:52 AM. Reason: Add picture
    Our most important shop tool is the pencil sharpener!

  2. #2
    Join Date
    Jan 2008
    Location
    Hobby-Tronics, Chiloquin Oregon
    Posts
    1,356

    Default

    get around to finally reading the Manual There's a manual?

    I've had my machine for 10 plus years and I learn something new almost every time I run it. In those times when I get stumped, tech support or the happy gang here always gets me through.

    I am so happy I chose ShopBot. Russ
    AKA: Da Train Guy

  3. #3
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    NICE Dave!
    Bought first Desktop sight unseen,except for pictures, so impressed we bought a second one 3 months later
    Never regretted for a minute!
    Keep up the good work!
    scott
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

  4. #4
    Join Date
    Nov 2016
    Location
    New Mexico
    Posts
    88

    Default

    Heck... Even the crate has served us well. Still in use today.
    IMG_0629.jpg
    Our most important shop tool is the pencil sharpener!

  5. #5
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    HA! Dave
    I separated the entire top from the pallet, removed one side for wheelchair access, and after gluing 3/4 ACX on top of it...use it as sanding/finishing/and occasionally a safe display area for Bob Rickard's work when he visited
    Attached Images Attached Images
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •