Results 1 to 1 of 1

Thread: 2007 PRS Alpha 7x12 ---> cut and drill 5x10

  1. #1
    Join Date
    Jun 2007
    Russell Ontario

    Default 2007 PRS Alpha 7x12 ---> cut and drill 5x10

    Time has come to upgrade to an even bigger machine. This one has done us very well over the years building cabinets and closets and some neat projects as well. It’s a 7x12 PRS Alpha with the following:

    Full 5x10 vacuum table, allows cutting and drilling of full 5x10 sheet
    4HP HSD Spindle
    8 spindle drill bank, 5 in X, 3 in Y
    7 Hp blower
    6 zone vacuum piping
    control computer
    control board for outputs to control the drill bank
    zeroing plate
    proximity switches
    Blum quick connect bit holders
    Assorted bits
    Assorted collets
    all settings required to use Mozaik for cabinetry

    Includes day of hands on training at our location if needed
    includes strapping, palletising and loading into truck.

    Crating and Shipping are extra, but we have good connections

    Asking $28000 USD

    Here's a video of it drilling and cutting

    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts