Results 1 to 3 of 3

Thread: Simple Step Stool

  1. #1
    Join Date
    Jun 2013
    Location
    Pasadena, CA
    Posts
    968

    Default Simple Step Stool

    I posted that in the Vectric forum already, but I thought my project came out quite nice and I guess not everybody here is on that forum. Please ignore if you have seen it already.

    If somebody is interested interested in the .dwg and VcarvePro files and some instructions have a look here (there are other new projects as well with free files).

    This is a simple step stool that I made as an improved copy of a very old handmade piece. Rather quick 2-sided project, this took me less than 2 days for prep, cutting, assembly, sanding and finish. No real 3d-tool paths but several "moulding tool paths" for the bevels.

    IMG_1059.JPG

    IMG_1062.JPG
    Box Joint, Dovetail, Guilloche and MazeMaker Software Here

  2. #2
    Join Date
    Sep 2012
    Location
    Blaine Mn
    Posts
    317

    Default

    Very nice, thank you. Gene

  3. #3
    Join Date
    Jul 2015
    Location
    Evans, GA
    Posts
    28

    Default

    Thank you Gene. CNC cut furniture never appealed to me because of its "clunky" rectilinear nature, but your stool does not fit that stereotype at all. Your design has an organic handmade feel and is quite nice! I'll have to check it out on the Vectric Forum. Thank you for sharing.
    George

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •