When I did it, I used a vcarve toolpath with flat depth. Just set an outer 'border' vector sightly larger than the material so it pocketed it all away but the raised letters.
When I did it, I used a vcarve toolpath with flat depth. Just set an outer 'border' vector sightly larger than the material so it pocketed it all away but the raised letters.
Ken Zey
Lookout Mercantile / Digital Millwork
Rogers, AR
www.CedarSlabSigns.com
www.lookoutmercantile.com
www.digitalmillwork.com
6x12 PRS alpha