2015 Shopbot PRS Alpha 60x120x6 FS in NY w/ HSD spindle

[Mark_BV]

Used 2015 Shopbot PRS Alpha 60x120x6
Computer included with Aspire 8 and control software included
4hp HSD spindle
V1000 VFD controller
Machine comes with 6 single vacuum motors in wooden mounting boxes for easy movement of motors and control of your vacuum bed. Great if you are in a shop with only single phase power and need serious vacuum hold down power.
Can disassemble and ship at buyers expense (not included in price listed below)
Machine runs great. Was replaced by a larger newer machine and has been sitting for a month in heated storage since the new unit arrived.
I also have the dust skirt and it is intact. Just not pictured.
Machine is setup for single phase all around.

$18,000 OBO

Please feel free to DM me here or call/text me at 716 217 0829

Email: machineman14216@gmail.com



IMG_0371.jpg

IMG_0363.jpg

IMG_0360.jpg

[Mark_BV]

Bump. Still available.

[jerry_stanek]

Is it an Alpha or standard the steppers look like standard

[Mark_BV]

Hey Jerry it is an Alpha. It was purchased an Alpha. Let me know if you have any other questions.

[bleeth]

Alpha motors-red label.
It is an Alpha
(TH geared standard are purple label.)

[srwtlc]

Just the opposite, purple = Alpha.

[Mark_BV]

It is an alpha with alpha motors. I have all documentation of what was purchased and sent to me. I am happy to send to anyone who is seriously interested in purchasing the machine.

[bleeth]

Mark:
We all only want to make sure your buyer and you end up happy.
Post either a close up of the motor where the model can be read or put the model number in a reply.

[srwtlc]

Pic of the control box outside and inside would help too.

[Mark_BV]

How do I get the photos to appear larger? I have the photos from the initial post on my phone and the model number on the motor in the picture is: ARM98AC-T7.2 Oriental motor.

If you plug the model number into google you get this: https://catalog.orientalmotor.com/it...c/arm98ac-t7-2

I've owned several standard and alpha before.

Please see picture of the control box below:


IMG_0368.jpg