Looking to sell my 2012 4x8 PRT Alpha.

Two tool machine. Single phase. HSD Spindle (Yaskawa VFD), air drill, Control Computer, 4 zone vacuume plenum (No turbine), upgraded hardened PRS style rails, and the Ecabinets SB link.

Spindle is two years old.

I'll throw in the original 2.2Kw HSD spindle as well. It still works; I put a new one on when I noticed the bearings starting to sound a little different than normal.

No Vectric software included.


Located in Saint Paul, MN.