Have a VERY lightly used ShopBot, 4 axis, 18x24 Desktop with 1.1HP 110V heavier duty router/spindle. The indexer system has been customized to fit a Unimat lathe spindle - which is tight and true. Also on the bed is another Unimat lathe so that the gantry can be parked over it while it spins at high speed for a 2d cut. The machine comes with an HP computer Windows 8 and Vetric software version 7.5.1. Spindle has been warmed up monthly (variable RPM) but machine has seen very little cutting use. Cutters, chucks, 3D digitizing probe, dust/protection surround (made from 1/2" acrylic) all with the machine. Machine is in Hope, Maine. Hate to see it go as it's a lovely set-up, just moving on to bigger projects. New from Shopbot currently would be over $9500+the two Unimats at $450 each! Asking $7000 - pick up. 207-763-2731 pinchbeckpipes.com