I just got back from the Skiils USA event where among other things we engraved the ShopBot logo and tiny eagles into almost 300 carpenters pencils using a ShopBot MAX.

The logos were carved with w 90 deg vbit, and then the blanks were flipped and the eagles carved with a 1/32" tapered ballnose bit from Amana.

The eagle model is one of the ones that's included with the Vectric software, and the carving is around 0.4" high by 0.6" long by 0.05" deep. My cellphone photo doesn't show the detail very well...they really turned out well.

eagle pencil.jpg