Results 1 to 3 of 3

Thread: 3D printed dust shoe

  1. #1
    Join Date
    May 2014
    Location
    MA
    Posts
    462

    Default 3D printed dust shoe

    Hey all, I recently re-printed and re-designed my dust shoe on my ShopBot. Thought you folks would appreciate it:

    https://youtu.be/BBrizADYwgE

    2019-08-28 at 10.18 AM.jpg

  2. #2
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,684

    Default

    Nice!

    I hear ya on the printing time factor, printed a bracket to mount my fixed tool touch off device that fit within the C-channel leg and it took around 24 hours!
    Scott

    If guns kill people, I guess pencils misspell words, cars drive drunk and spoons make people fat.

    "Those who hammer their guns into plows, will plow for those who do not" - Thomas Jefferson




  3. #3
    Join Date
    May 2014
    Location
    MA
    Posts
    462

    Default

    I did this one on an Ultimaker with a larger nozzle and it was all done in around 11 hours for all of the parts. I could probably shave an hour off of that.. but that still qualifies as a long time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •