Results 1 to 3 of 3

Thread: By default, the Z axis rises to 1" when Stop is pressed

Hybrid View

  1. #1
    Join Date
    Feb 2018
    Posts
    21

    Default By default, the Z axis rises to 1" when Stop is pressed

    Unfortunately, I don't actually have that much headroom on this particular project, so it triggers a fault, and I can't resume smoothly. Where do I change that 1" value to something lower, like .25"? It doesn't seem to be in any of the places I looked for it.

  2. #2
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,094

    Default

    Type VC in command line (Values Cutter) change Safe-Z to whatever you want(I JUST finished a project that needed .01")
    ALSO make sure in the Vectric file Safe Z1 and 2, AND the HOME position are set accordingly.
    scott
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  3. #3
    Join Date
    Feb 2018
    Posts
    21

    Default

    Thanks, Scott - there had to be a way!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •