We cut 3/4" plywood with 1/2" straight fluted bits from Lowes ($17 each).
We ramp with 5 passes at 60 ipm and 16k rpm.
Great results!
We are not creating edges which require superior finished cuts. More like rough cutting.
We cut 3/4" plywood with 1/2" straight fluted bits from Lowes ($17 each).
We ramp with 5 passes at 60 ipm and 16k rpm.
Great results!
We are not creating edges which require superior finished cuts. More like rough cutting.
Our most important shop tool is the pencil sharpener!