Results 1 to 4 of 4

Thread: 2016 4x8 Alpha ATC

  1. #1
    Join Date
    Oct 2019
    Posts
    2

    Default 2016 4x8 Alpha ATC

    Has custom 3/4" thick aluminium machine bed that does not warp with temp and humiduty swings like the plywood one Shopbot recommends, separated into 4 zones.
    8" Z stroke
    Pressure Z plate
    Original invoice attached, should have all the info about the machine on it.
    machine was $34,000
    Aluminum bed was $1200
    8 ISO30 tool holders at $170 each
    assortment of bits
    Oneida vortex dust collector $2200
    Cost new totals $38,760
    Asking 23,000
    This does not include the Becker Vacuum pump!! I will sell it but it will be very close to the original price, plan on using it on another machine. The pump is 3 phase also.
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 2008
    Location
    A Dynamic Design, Wilmington NC
    Posts
    11

    Default

    Where are you located
    Thanks
    J-R

  3. #3
    Join Date
    Oct 2019
    Posts
    2

    Default

    Quote Originally Posted by jr_bourget View Post
    Where are you located
    Thanks
    J-R
    Fayetteville, TN

  4. #4
    Join Date
    Jan 2008
    Location
    A Dynamic Design, Wilmington NC
    Posts
    11

    Default Info

    Quote Originally Posted by Swoodman View Post
    Fayetteville, TN
    I sent you a personal message
    thanks
    J-R

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •