Results 1 to 3 of 3

Thread: Relay Board, Control Card, Spindle Control & RBK Board for sale

  1. #1
    Join Date
    May 2014
    Location
    MA
    Posts
    462

    Arrow Relay Board, Control Card, Spindle Control & RBK Board for sale

    Hey all, I've got a set of control cards for a ShopBot for sale. These were all pulled out of my fully working machine.

    First up is a ShopBot motion control card. This board is a USB card that talks to SB3 and sends moves to your machine. Has SB standard DB37 connector so it can be plugged into ShopBot breakout boards.

    It's a V201A:

    IMG_20191102_165847.jpg

    New MSRP $250.
    Asking $125

    Next up is a spindle speed controller. For those of you that have a spindle (NOT a router) and you don't have software control, this SB original unit will let you upgrade so that your spindle speed is controlled by SB3:

    IMG_20191102_165902.jpg

    New MSRP: $250
    Asking $125

    Next up is a ShopBot relay board. You can add this to your ShopBot to control external devices such as a router, dust collector or vacuum table (or even some lights to tell you your job is done!)

    IMG_20191102_165920.jpg

    MSRP $160
    Asking $80

    Lastly we have an RBK Board. This is a current generation board. Great if you need a replacement part, or are upgrading for some more modern SB features that aren't offered by the older boards.

    IMG_20191102_165827.jpg

    MSRP $350
    Asking $175

    All of these parts were used by me in my machine and are all working. They've seen less than 2 years in service. They'd make a great set if you're building a new control box, or refreshing an old one.

    I'd sell them as a set, or individually. First come first served!
    Last edited by EricSchimel; 11-02-2019 at 07:23 PM.

  2. #2
    Join Date
    May 2014
    Location
    MA
    Posts
    462

    Default

    Relay board is sold. The rest is still available!

  3. #3
    Join Date
    May 2014
    Location
    MA
    Posts
    462

    Default

    Control card is sold!

    I have the RBK board and the spindle speed controller left.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •