Results 1 to 3 of 3

Thread: clip art disappears

  1. #1
    Join Date
    Sep 2009
    Posts
    28

    Default clip art disappears

    i draw a 4x8 work space. i draw a smaller box on the 4x8 work space. on the smaller box i place a fleur de lys . when i run the profile toolpath and press calculate the fleur isn't there.
    what am i doing wrong. Thanks

  2. #2
    Join Date
    Jan 2004
    Location
    Cleveland TN
    Posts
    350

    Default

    Would be best if you either attached the file or a link to the file so someone can review and advise. Only thing I can think of without seeing the file is that you might not have the fleur de lys highlighted when calculating it.
    2005 PRT Alpha 48x96
    2013 Colombo 3hp spindle
    Indexer (converted lathe)
    Aspire 9.0

  3. #3
    Join Date
    Sep 2009
    Posts
    28

    Default

    thanks. i will

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •