i draw a 4x8 work space. i draw a smaller box on the 4x8 work space. on the smaller box i place a fleur de lys . when i run the profile toolpath and press calculate the fleur isn't there.
what am i doing wrong. Thanks
i draw a 4x8 work space. i draw a smaller box on the 4x8 work space. on the smaller box i place a fleur de lys . when i run the profile toolpath and press calculate the fleur isn't there.
what am i doing wrong. Thanks
Would be best if you either attached the file or a link to the file so someone can review and advise. Only thing I can think of without seeing the file is that you might not have the fleur de lys highlighted when calculating it.
2005 PRT Alpha 48x96
2013 Colombo 3hp spindle
Indexer (converted lathe)
Aspire 9.0
thanks. i will