I've been using VCarve Pro for many years on a generic 24 X 24 machine I bought off

[Bud Meade]

of ebay.

Looking to upgrade to a higher quality machine and have been looking at the desktop.

My question is will all of my VCarve files run on a Desktop and can I use VCarve to design new jobs and run them on a Desktop?

[scottp55]

Bud,
You'll have open the files, and change to the correct Shopbot Post Processor, and then save the toolpaths and file again.....Yes!

You'll LOVE the Desktop!!

[Bud Meade]

Thanks Scott.

BTW Loved the owl. I have a friend who would appreciate something like that. Did you do that on a Desktop?

Care to tell me a little more about the process?

Thanks

[scottp55]

Yes Bud...all on the Desktop.
In a rush now, but went into detail in both the Vectric case study, and the thread...should answer any questions...If not,ask
https://www.vectric.com/vectric-comm...20case%20study


https://forum.vectric.com/viewtopic.php?f=5&t=30933

Thanks,
scott

[scottp55]

And just had picked up the Ural Squirrel with stand(bottom of this thread) ;
https://forum.vectric.com/viewtopic....32408&start=15

Gave the Desktop a good cleaning today

[8Ball]

You may want to consider updating your Vectric product to a product with more features and better support.