of ebay.
Looking to upgrade to a higher quality machine and have been looking at the desktop.
My question is will all of my VCarve files run on a Desktop and can I use VCarve to design new jobs and run them on a Desktop?
of ebay.
Looking to upgrade to a higher quality machine and have been looking at the desktop.
My question is will all of my VCarve files run on a Desktop and can I use VCarve to design new jobs and run them on a Desktop?
Bud,
You'll have open the files, and change to the correct Shopbot Post Processor, and then save the toolpaths and file again.....Yes!
You'll LOVE the Desktop!!
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Thanks Scott.
BTW Loved the owl. I have a friend who would appreciate something like that. Did you do that on a Desktop?
Care to tell me a little more about the process?
Thanks
Yes Bud...all on the Desktop.
In a rush now, but went into detail in both the Vectric case study, and the thread...should answer any questions...If not,ask
https://www.vectric.com/vectric-comm...20case%20study
https://forum.vectric.com/viewtopic.php?f=5&t=30933
Thanks,
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
And just had picked up the Ural Squirrel with stand(bottom of this thread) ;
https://forum.vectric.com/viewtopic....32408&start=15
Gave the Desktop a good cleaning today
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
You may want to consider updating your Vectric product to a product with more features and better support.