Just a few recent cuts in firewood and branches...
Just a few recent cuts in firewood and branches...
scott P.
2013 Desktop/spindle/VCP 12.0*
Maine
A couple more, but Harley was dimensioned first,and was a test cut for a larger one so was playing with Brady's 3D VR settings Finally...
scott P.
2013 Desktop/spindle/VCP 12.0*
Maine
Beautiful work!
ShopBot Details:
2013 PRS 96x60x12 (Centroid upgrade)
4hp Spindle
12" indexer
Aspire
Rhino
Fusion 360
Ferrari 360
Prusa MK3S+
Prusa XL multi-tool
Beautiful work Scott!! I think when I retire from mainly cabinet work, I'm going to start using my CNC to do the cool stuff you do.
Don
Diamond Lake Custom Woodworks, LLC
www.dlwoodworks.com
***********************************
Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece; But to skid in broadside, thoroughly used up, worn out, bank accounts empty, credit cards maxed out, defiantly shouting "Geronimo"!
If you make something idiot proof, all they do is create a better idiot.
Nice! Need to tighten the chain on the Harley.
Scott
Thank you all for the kind comments!
The "Mom's Harley" project was the first one in a while made from perfectly a straight/parallel rectangle.....branches and firewood are Never boring
And Tiny and Small's are infective...even Randall got into it
https://forum.vectric.com/viewtopic.php?f=2&t=33770
Funny Scott.......That was one of the first things Mom asked...."Can you tighten the chain?"
Actually went into the reason Mom picked a Harley model dedicated to the memory of her father here(Interesting Harley story);
https://forum.vectric.com/viewtopic.php?f=2&t=33936
Her bigger Birdseye one is next(after some more testing of VR settings for the Desktop)
Thanks Brady.....and even Loaded Scott's VR settings for small VCarving
scott P.
2013 Desktop/spindle/VCP 12.0*
Maine
Wow- like many others here, wish I had the time to try such cool stuff!
Particularly interesting to me was the "lin-wax" methodology. Pretty dang brilliant. Really appreciate you sharing your techniques!
Jeff
Thanks Jeff......When you and Don retire you can be a Shopbot Bum like me
Of course cabinets and furniture would daunt ME
Just paying back a little from all the techniques I learned from you guys!
Interesting that it started kind of a "Tiny" craze on Vectric Forum
Thanks all!!
scott
scott P.
2013 Desktop/spindle/VCP 12.0*
Maine
Nice work as always.
Thanks David!
Just helping the Winter go by faster
Test cut for a larger piece of Curly(Buddha).
A total muck up from years ago of Wolves, that Creative sanding found a home with my Drs wife finally
And then a PITA plaque that mill marks took forever to sand/burnish out for a very good friend's girlfriend.
Spindle is warming up for a Small Racoon in a Walnut Branch.....Winter is sliding by!
scott P.
2013 Desktop/spindle/VCP 12.0*
Maine