Results 1 to 4 of 4

Thread: Buddy PRSstandard BT48 with vacuum fixture

  1. #1
    Join Date
    Apr 2015
    Location
    Vancouver, WA
    Posts
    3

    Default Buddy PRSstandard BT48 with vacuum fixture

    PRSstandard BT48 for sale with 48" x 48" vacuum fixture installed. Includes:

    • CNC Digitizing Probe - 3D (unused)
    • CNC Diamond drag engraving bit (unused)
    • CNC Thin line drawing kit
    • Vacuum box and table fixture (see picture)
    • Original table (unused)
    • 24" powerstick
    • 48" powerstick
    • Any gasketing I have left in the shop (http://www.allstaradhesives.com)


    Location in Vancouver, WA -- asking price $6000

    The CNC is in good condition. The table should be fly cut and re-grooved (I have the file for this). The vacuum is powerful enough to hold down parts through a MDF bleed board (works better with bigger parts).

    The CNC is in the basement. Some disassembly (by you) required to get it out.

    Running in action:

    4x4.jpg
    https://youtu.be/b4Hyl-paMj4

    Vacuum fixture table:
    cnc-table.jpg

    Vacuum box and connection:
    vacuum-setup.jpg

  2. #2
    Join Date
    Oct 2009
    Location
    Saylor Fine Woodworking, Monroe Oregon
    Posts
    97

    Default

    Has it been sold?

  3. #3
    Join Date
    Apr 2015
    Location
    Vancouver, WA
    Posts
    3

    Default

    No and unfortunately I moved out of state and have this in storage without easy access to it. It's locked up in the basement of a house that I own, but is rented out. Thanks for following up.

  4. #4
    Join Date
    Oct 2009
    Location
    Saylor Fine Woodworking, Monroe Oregon
    Posts
    97

    Default

    OK, if you ever decide to sell, I'm a few hours from your place. saylorguitars@gmail.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •