Results 1 to 3 of 3

Thread: Part Larger then VCarve file

  1. #1
    Join Date
    Jun 2018
    Location
    Kingston, OK.
    Posts
    5

    Default Part Larger then VCarve file

    I am new to VCarve and shopbot I cut HDPE with a .1562 Upcut bit when i cut my parts they are a 1/4 inch larger then my file I am cutting outside on the file Need help
    Thanks Roger

  2. #2
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,251

    Default

    Roger…

    HDPE… be careful! It can take over your shop!

    There are several things that could be causing your problem…
    First, how is your bit defined in the tool database? If you can cut other proper sized parts, this is likely the culprit!
    Let me know!

    SG
    Attached Images Attached Images

  3. #3
    Join Date
    Jun 2018
    Location
    Kingston, OK.
    Posts
    5

    Default

    Steve
    Yes HDPE is every where we sweep the shop 2 or 3 times a day it is slick under foot
    I redid the file in VCarve and got it fixed I hope
    Thanks Roger

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •