Results 1 to 2 of 2

Thread: Having an offset problem…

  1. #1
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,264

    Default Having an offset problem…

    I'm having an offset problem…

    I’m running a PRT Alpha with two Z axis (Z and A).
    The file I’m running ends with the A-axis run last, when I run the next file, the Z to A offset is still active, making the toolpath 6+” mis placed.
    I’ve run this machine many years with out this happening! Has something changed? Am I forgetting something?
    How do I clear the offset?

    Thanks!
    SG

  2. #2
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,264

    Default

    I did a work around… I added a dummy path, switching to the tool in the Z axis before ending the file. It adds a few seconds to the run but at least works!
    SG

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •