Problems I've now fixed:
1) Remove unwanted JH & J5 jogs at start & end of file. I was manually deleting these from every cut file, but I think a newer release of the post from Fusion may have already fixed the JH.
Remove jogs.jpg
2) X & Y feeds (possibly Z also) limited to 3 IPS. For some reason my cut files are limited to 3 IPS (180 IPM) regardless of what feeds are set to in F360. ie: This TP's feed is set to 270 IPM (4.5 IPS) in F360, but the cut file is only 3 IPS.
Wish list: Second Z axis router
1) My 3 axis CNC has two Z axis routers, which I often use with other CAM apps (ie: head 1 [Z] for routing, head 2 [A] for drilling). The post for those apps use to the X Y offsets in my machine's config file (CN90). Wondering if it's possible to add this functionality to a F360 post & then somehow define those setups in CAM?