I just purchased the machine. The machine works perfectly and is in excellent condition. It is dismantled and all parts are included except router.
The machine is a 1 owner machine and was never used to cut anything. It was used as a painting device. The previous owner created a software and system that would dispense paint from heads that were attached to the Z access instead of a router or spindle. So the machine has not seen any wear or tear.

My intention was to utilize the machine for my business but due to the Pandemic I am unable to utilize it.

The machine has an upgraded control system and includes a dedicated Laptop with the control system and design software.

Have all original documentation as well as manuals, and everything needed to shim and level the machine to spec.

Machine is in Miami, Florida. Asking $5,700

Feel free to reach out by email at gbalmelli@att.net


00P0P_iOK6Vpy4TYu_600x450.jpg00T0T_GhokS7oPd9_600x450.jpg00b0b_9J57MoaEzXd_600x450.jpg00Q0Q_cptJOsjumxA_600x450.jpg00j0j_31enCPwyX9u_600x450.jpg