Results 1 to 3 of 3

Thread: Realistic Difference between Black Box and Regenerative blower

  1. #1
    Join Date
    Oct 2010
    Location
    Gainesville Florida
    Posts
    128

    Default Realistic Difference between Black Box and Regenerative blower

    Hello all,
    I have been operating effectively for 6+ years on my shop made 4 motor "Black Box" vac system. For what I have in it it has been great. I use it weekly for sheet goods and various items. For the most part it has been adequate except for smaller parts. I have the opportunity to buy a 10hp regenerative blower fairly cheap, and now have the 3 phase to run it. Do any of you smarter-than-me people know if I could expect a noticeable increase in holding power, considering all things equal, from the 10hp regenerative vs the 4 - 220v lighthouse motors? If you add up all the CFM from the 4 lighthouse motors its more than the specs for the blower, but is that real apples to apples? Its just hard for me to believe that this massive blower can't beat out the 4 vac motors in some way. Opinions and fact would be appreciated.

    Thanks,
    Mark

  2. #2
    Join Date
    May 2011
    Location
    ny
    Posts
    804

    Default

    I am no expert but another factor is how many inches of mercury does each system pull?

  3. #3
    Join Date
    Jun 2015
    Location
    Durham NC
    Posts
    64

    Default

    Here is a writeup that was done by one of our engineers at ShopBot on the differences between different vacuums as well as some info on how to think about them and their efficiencies, this may help.

    https://www.dropbox.com/s/jvtic7rwi6...s%20.docx?dl=0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •