-
Engraving Material
We are new to the Shopbot CNC world and are trying to route Rowmark engraving material. The results are not acceptable due to tooling marks. We are using an 1/8" end mill with slow feed rates ( 20 inches per min), moderate router speeds ( 14,000 rpm) and cutting depth of .02. The tooling marks are not everywhere but appear on certain letters inconsistently.
Any thoughts on how to achieve a cleaner end product?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules