Results 1 to 2 of 2

Thread: Forgetting Tool in Spindle

  1. #1
    Join Date
    Oct 2011
    Location
    Pittsburgh
    Posts
    8

    Default Forgetting Tool in Spindle

    Hello,

    My shop bot started forgetting it has a tool in the spindle outta the blue. For example: after I run a part file I cannot simply hit replay or it will try and pick up the same tool already in the spindle. The same goes for multi tool part files. If I have say tool #1 set to cut the first tool path then tool #2 set to cut the next - it will forget it has tool #1 in the spindle and try to pick up tool #2.

    My first instinct is that it is in the programming but also wondering if it is somewhere along the line of hardware because I haven’t touched any of the programming. I’m not well versed in either so any and all help would be much appreciated.

    Thank you,

    Cody
    PRS Alpha - 5hp HSD ATC Spindle


    -best part of life is living it-

  2. #2
    Join Date
    Jun 2015
    Location
    Durham NC
    Posts
    65

    Default

    Cody,

    Send us an email at support@shopbottools.com with the cut file you are running and we can help.


    Best Regards,

    Tom
    Technical Support
    ShopBot Tools, Inc

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •