Results 1 to 2 of 2

Thread: How tram spindle front to back (X-Z plane)

  1. #1
    Join Date
    Dec 2015
    Location
    New Jersey
    Posts
    60

    Default How tram spindle front to back (X-Z plane)

    I'm using the Shopbot PRSalpha 96-48 Model 10216-01 at my makerspace. I noticed the spindle is not vertical from front to back (X-Z place). I know how to adjust left and right by loosening the 6 hex bolts behind the spindle. But how do you adjust in the front-back direction?

  2. #2
    Join Date
    May 2014
    Location
    MA
    Posts
    610

    Default

    You have to loosen the V rollers on the gantry. They are eccentric so you can raise and lower them to tip the spindle forward and backwards. You can probably do it with an allen key, but you might also need a low profile wrench. Ones for bike maintenance can do it. I don't remember the size, but ShopBot support can tell you.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •