I am looking for some advice on selling my Shopbot, and I have very little reference for its value.

I have a 96x48 PRT Standard machine that was given/loaned to me a few years ago. A friend bought it used and never set it up, and it sat in storage for a few years before I got my hands on it.

This was my first experience with a CnC machine and it was overwhelming, so it took me forever to get it working. I had many issues, and was never really able to get it working consistently. I ended up replacing the z axis with a C beam system and a smaller router, and switched over to a Mach4 based controller. I was still not able to get consistent cuts, and since this was just a hobby I couldn't sink in any more money. I still have all the original parts, so it could restored back to the original setup with some new motor cabling.

I imagine someone with more knowledge/money to invest could get it working well, so if anyone has some advice about value or wants to make a offer I'm open to it.

I'm located in Central Virginia.

Thanks!
Arthur



IMG_20201118_231854806.jpg
IMG_20201118_231900671.jpg
IMG_20201118_231909172.jpg
IMG_20201118_231948857.jpg
IMG_20201118_231956497.jpg