Results 1 to 10 of 10

Thread: For Sale Dissasembled 2006 PRT alpha 4'x8', no table, 3.25hp Porter Cable Router,

  1. #1
    Join Date
    Jan 2021
    Posts
    5

    Default For Sale Dissasembled 2006 PRT alpha 4'x8', no table, 3.25hp Porter Cable Router,

    NO vac system, Part Wizard, 3d Vectric, software windows 98, could include Dell Laptop that runs Windows 98
    Hobby used only
    Machine is in San Jose Ca
    Bought from Shopbot order number 1623, 6/2/06
    email bobbyfreeman505@gmail.com

  2. #2
    Join Date
    Jan 2011
    Location
    Buchanan Michigan
    Posts
    161

    Default

    You have a price and would you consider shipping rather than pick-up?

  3. #3
    Join Date
    Jan 2021
    Posts
    5

    Default

    Sure.. $2,000 for machine. $200 Crating, plus freight charges ?
    I think I would need to crate the large parts and box the steper motors, router, dust hose, ect

  4. #4
    Join Date
    Dec 2008
    Location
    , Richmond Tx
    Posts
    1,086

    Default

    Not to knock the sale, but a new member, first post, cheap machine.... Be careful about sending money. Good luck to all
    Kenneth

  5. #5
    Join Date
    Jan 2021
    Posts
    5

    Default

    Not very nice to imply w/o knowing facts. It is a legitimate machine purchased from the manufacturer. I assume that it didn't occur to you that perhaps I have no place use it due to a recent move and have no desire to deal with lengthy negotiations.

  6. #6
    Join Date
    Dec 2008
    Location
    , Richmond Tx
    Posts
    1,086

    Default

    Robert, when I said good luck to all, that included you. The only thing I "implied" is you are a brand new member.
    Kenneth

  7. #7
    Join Date
    Mar 2005
    Location
    San Jose, CA, USA
    Posts
    685

    Default

    Wish I had room for a second machine.
    - Randall Newcomb
    10 fingers in, 10 fingers out
    another good day in the shop

  8. #8
    Join Date
    Jan 2021
    Posts
    5

    Default

    Thanks Kenneth, I bought the machine from Shopbot in 2006 and made a few things with it. I had lots of fun and have a few wonderful pieces of furniture and picture frames.
    With my last move, i just don't have the space to set it up.

  9. #9
    Join Date
    Mar 2005
    Location
    San Jose, CA, USA
    Posts
    685

    Default

    If someone outside of San Jose wants me to inspect the machine for them I'd be glad to help. Our first machine was a PRT Alpha from 2005 so I am familiar with this type of setup.
    - Randall Newcomb
    10 fingers in, 10 fingers out
    another good day in the shop

  10. #10
    Join Date
    Jan 2021
    Posts
    5

    Default

    Machine Has Been Sold!!!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •