Results 1 to 4 of 4

Thread: PRT Proximity Switch wiring

  1. #1
    Join Date
    May 2007
    Location
    Harrisville, Utah
    Posts
    18

    Default PRT Proximity Switch wiring

    Does anyone have a wiring diagram for the PRT v4G proximity switches? Chasing a problem here and found the wires disconnected inside the control box and I sure can't find that wiring info!

    Thanks in advance!

  2. #2
    Join Date
    Dec 2007
    Posts
    2,348

    Default

    Here is a doc from shopbot for my 4G board
    Attached Images Attached Images

  3. #3
    Join Date
    Dec 2007
    Posts
    2,348

    Default

    The 2 brown wires go to 24 volt+ the 2 blue wires go to Ground and the X black wire goes to input 2 and the Y black wire goes to input 3

  4. #4
    Join Date
    May 2007
    Location
    Harrisville, Utah
    Posts
    18

    Default

    Jerry,

    My proximity switches have red/black/green wires. That picture was a bit different than my control box but enough info that I was able to get wiring fixed and the proximity switches are working again. Thanks! Rick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •