New Computer - Issues with Zzero
Hi all,
I just installed a new computer and got things working again after installing Shopbot Control software with help from Shopbot Techs. My issue is one that I have never experienced before: after running the C4 command, the Z raises to 1" then adds .5" to that but stays at the 1" height.
Any help would be greatly appreciated, will call Shopbot Tech Monday as this is not critical at the moment.
Joe
2005 PRT Alpha 48x96
2013 Colombo 3hp spindle
Indexer (converted lathe)
Aspire 9.0