2004 PRT 48" x 96" w/ 5hp Columbo Spindle

[don]

Original Owner Since Fall of 2004

• 2004 96x48 PRT
• 5HP Colombo Spindle setup for 220V 30Amp Single Phase
• Delta Variable Frequency Drive already wired and connected to the Spindle
• Z zeroing plate
• X and Y prox switches
• E-Stop button and wiring
• Shopbot Controller (All 5 drivers are in working condition Indexer could be added)
• Serial Cable to connect PC to ShopBot Controller
• Hard Stops at both ends
• New Springs on Z axis to assure no down drift when powered down

2 Modifications

• Added 2" thick Bowling Alley Lane with threaded Inserts fasten mdf spoil board
• Added 3" x 3" x 24" long (80/20 aluminum) risers to Y axis gain Z height back.
• Removed original threaded feet and added vibration pads to help dampen any vibration

Collets (left to right - all used)

• 1/16" ER25 1 collet
• 1/4" ER25 1 collet
• 5/16" ER25 1 collet
• 3/8" ER25 3 collets
• 1/2" ER25 2 collets
• 5/8" ER25 1 collet

Additional Items

• 3 new pinions ( 2 for X and 1 for Y axis )
• 2 Vexta A6497-9412KTG for either the x or y axis
• 1 additional Shopbot Controller (All 5 drivers are in working condition Indexer could be added)

All in good working condition - Well Maintained
North Central Indiana
Buyer Responsible for Shipping - can help with loading
$10,000
donald9 at gmail.com - Text 260 - 5 six 8 - 333 zero

[don]

Additional Photos

[don]

Lowered the price to $8900
I need the room.

Email Text or Call
donald9 at gmail.com
2 six 0 - 5 six 8 - 333 zero

Don

[don]

Reduced $7900
This 2004 PRT 48" x 96" needs a new home.
I'm in need of the room.
Will entertain offers.

Don

[don]

Reduced $6000
This 2004 PRT 48" x 96" needs a new home.
I'm in need of the room.
Will entertain offers.

Email Text or Call
donald9 at gmail.com
2 six 0 - 5 six 8 - 333 zero

Don

[don]

Pending....

[don]

Sold, the bot is headed to Cincinnati