Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: control box not being recognized

  1. #11
    Join Date
    Jul 2010
    Location
    Wyoming, Illinois.
    Posts
    70

    Default

    I’ve tried direct to a USB port and to a hub. No luck

  2. #12
    Join Date
    Jul 2010
    Location
    Wyoming, Illinois.
    Posts
    70

    Default

    I mean even when machine IS turned off

  3. #13
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,796

    Default

    What type of USB connection do you have on your controller, direct to the board with the USB cable or one of the short USB to Serial adapters? If you have the adapter, try a new one, as they occasionally go bad. Otherwise, contact SB HQ for further support.


    Scott

    "It’s easier to fool everyone than it is to convince them they've been fooled" - Mark Twain





  4. #14
    Join Date
    Jul 2010
    Location
    Wyoming, Illinois.
    Posts
    70

    Default

    It’s a usb direct to the board.


    Quote Originally Posted by srwtlc View Post
    What type of USB connection do you have on your controller, direct to the board with the USB cable or one of the short USB to Serial adapters? If you have the adapter, try a new one, as they occasionally go bad. Otherwise, contact SB HQ for further support.



  5. #15
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    543

    Default

    Time to contact Shopbot support…….let us know what the solution is……
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 4
    2.2Hp universal 4 zone Vac Table

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •