Results 1 to 4 of 4

Thread: State outline cut files

  1. #1
    Join Date
    Jun 2004
    Location
    Springfield Mo
    Posts
    851

    Default State outline cut files

    I suppose a set of these State outline files are located somewhere.

    I can do Colorado on my own, but some are a bit more complicated. Thanks


    The decimal point seems to be the most important on the z axis... x & y not so much....
    ShopBot... Where even the scraps and things you mess up and throw away are cool....

  2. #2
    Join Date
    Sep 2013
    Location
    Lakin KS
    Posts
    316

    Default

    Just a quick search came up with this

    https://suncatcherstudio.com/patterns/us-states/
    Tom Bachman,
    Drafting/Woodworking Instructor RETIRED!
    Lakin, Kansas

    2001 PRT4896
    https://i.imgur.com/xWEFfDk.jpg

  3. #3
    Join Date
    Mar 2017
    Posts
    94

    Default 50 state file

    [QUOTE=curtiss;209180][I]I suppose a set of these State outline files are located somewhere.

    I can do Colorado on my own, but some are a bit more complicated. Thanks

    I have a 50 state file I can post for you, I just have to figure out how to do it. I will get it to you some how, don't buy one. I used it to make cutting boards. Thanks JERRY

  4. #4
    Join Date
    Mar 2017
    Posts
    94

    Default 50 statefile

    [QUOTE=Jerry Carney;209185]
    Quote Originally Posted by curtiss View Post
    [I]I suppose a set of these State outline files are located somewhere.

    I can do Colorado on my own, but some are a bit more complicated. Thanks

    I have a 50 state file I can post for you, I just have to figure out how to do it. I will get it to you some how, don't buy one. I used it to make cutting boards. Thanks JERRY
    curtiss send me your e mail address and I will send you the file thanks JERRY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •