Results 1 to 3 of 3

Thread: Becker Vacuum Pump on the decline

  1. #1
    Join Date
    Sep 2015
    Location
    Buford, GA
    Posts
    47

    Default Becker Vacuum Pump on the decline

    Hi everyone.

    I bought a used 2016 PRSAlpha ATC back in mid April, which came with a Becker vacuum pump. In April/May, it was pulling about 10-12" of vacuum for a sheet of plywood, and about 15" for acrylic.

    We've probably run the vacuum table about 20-30 hours per week since. Now, it's only giving me 5-6" vacuum on plywood, maybe 8-10" on acrylic.

    If this is a maintenance/wear issue, would the performance deteriorate this quickly? Yes, I clean the filter.

  2. #2
    Join Date
    Aug 2011
    Location
    Wilkesboro, NC
    Posts
    104

    Default

    Only thing that springs to mind, is I get alot of leakage around the perimeter of my spoilboard, and if it hasn't been surfaced in a while I see a drop in pressure.

    Also when we are running cabinet grade plywood we get a better vacuum than when we run construction grade CDX

  3. #3
    Join Date
    Mar 2013
    Location
    Memphis TN
    Posts
    902

    Default

    Lots of seals in those pumps. I suspect one or more seals has given up the ghost and now is leaking prodigiously. I suggest running the pump and with a mechanic stethoscope ($15 on Amazon), listen for the leak. It will probably be obvious.

    If you live in a decent size city, you should be able to find a place that can maintain that pump locally.
    ShopBot Details:
    2013 PRS Alpha 96x60x12
    4hp Spindle
    12" indexer
    Aspire
    Rhino
    Fusion 360
    Ferrari 360
    Prusa MK3S+

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •