Looking to retire and have a fully up to date version of Cabinet Vision. Has the NC Center which gives it the cnc nesting and tool path capability. Create drawings, cut files and tool paths. I can also supply you with the post file which allows it to run on at least a Shopbot Alpha which I have run it on. I ran a spindle and an air drill with it. No doubt, very expensive software and if I can recover some of my investment and save you quite a bit of mone I’d be happy. It was undoubtedly, besides the Shopbot, the best investment I ever made work wise. I have 2 keys or dongles if you prefer. It will have to be registered and there is a cost associated with that. You get both keys and you may or may not decide to register both. Make me a respectable offer and we’ll see what we can work out? PM me if you are interested