Results 1 to 4 of 4

Thread: Cant connect to Port

  1. #1
    Join Date
    Nov 2010
    Location
    Tacoma, WA
    Posts
    14

    Default Cant connect to Port

    So I'm getting the Can't find Port Can't Connect to Port etc. Yet all Ports are working properly. The ShopBot tower red light is Blinking suddenly. It's from 2007. I've had this happen before , Bbut I would just do a re-start and all was good. But not this time.

  2. #2
    Join Date
    Nov 2010
    Location
    Tacoma, WA
    Posts
    14

    Default

    Oaky I bought a new USB Cable, uninstalled and reinstalled the program. Nuttin working. I still get the Can't Connect to Ports. And as the computer reads,,, Ports are working properly.

  3. #3
    Join Date
    Mar 2008
    Location
    Radford VA
    Posts
    609

    Default

    This just happened to me and I had to buy the new Version 2 control card from Shopbot for $250. I actually just installed it last night and ran two simple part files without a problem.
    PRT Alpha with 7.2 upgrade, indexer, and PC router

  4. #4
    Join Date
    Jan 2004
    Posts
    707

    Default

    Could be the atc power supply that is in the control box that provides 5v and 12v. This was the issue with mine. if not its the card.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •