Question about pricing to sale my 2008 PRS Standard 60/60 shopbot

[bcorbin]

I have a question about pricing my shopbot, after many years with my loyal machine I am stepping away from my business.

I have a 2008 PRS Standard 60x60 machine 220-240v 5hp (I had it custom made to this size because I specifically cut 5x5 baltic birch) I'm just going to sale it locally but really have no sure idea of what the pricing on it should be.

Any guidance would be appreciated.

It doesn't have a vacuum system but does have the hose cradle kit which has never been used.

It has a brand new router motor and has been regularly maintained and updated.

[ken_rychlik]

Odd size for most folks. I would say 7k if it just has a router, and 8 or 9 with a spindle depending on size.

[bcorbin]

Thanks, It has a 5hp spindle. I was thinking $7500 so sounds like I'm in the right ball park. Appreciate you taking time to reply.

[artbot]

I'm in the market for a 5x5. Was looking at the AvidCNC 5x5. They are about 10k equipped.