Results 1 to 4 of 4

Thread: Input 4 error

  1. #1
    Join Date
    Sep 2013
    Location
    Lakin KS
    Posts
    314

    Default Input 4 error

    Hey guys, I was doing an engraving cut with my PRT STD, I hit the space bar to stop the file and the machine acted funny, like it was thinking about the command, then it poops up with the Limit switch on input 4 is on, check and retry. Then it tells me the stop switch is on. I've rebooted the machine (control box) and restarted the computer to no avail. continue getting the same type of errors and the machine won't move.

    I've had the happen before, but can't, for the life of me, remember what I did to fix it. Could it be my wireless keyboard?

    Any ideas?????
    Tom Bachman,
    Drafting/Woodworking Instructor RETIRED!
    Lakin, Kansas

    2001 PRT4896
    https://i.imgur.com/xWEFfDk.jpg

  2. #2
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,814

    Default

    Possibly a corrupted software setting, try resetting it with UR and follow the prompts.
    Scott

    "It’s easier to fool everyone than it is to convince them they've been fooled" - Mark Twain





  3. #3
    Join Date
    Sep 2013
    Location
    Lakin KS
    Posts
    314

    Default

    Thanks Sxott, I'll give it a try.
    Tom Bachman,
    Drafting/Woodworking Instructor RETIRED!
    Lakin, Kansas

    2001 PRT4896
    https://i.imgur.com/xWEFfDk.jpg

  4. #4
    Join Date
    Sep 2013
    Location
    Lakin KS
    Posts
    314

    Default

    Yea, no love there. and I looked back to the last time this happened, and tried the solution, still no love.

    Any other suggestions?
    Tom Bachman,
    Drafting/Woodworking Instructor RETIRED!
    Lakin, Kansas

    2001 PRT4896
    https://i.imgur.com/xWEFfDk.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •