Results 1 to 5 of 5

Thread: Selling 2010 PRS Alpha 144x72x24 w/ 4hp HSD

  1. #1
    Join Date
    Nov 2021
    Location
    Bellingham, WA
    Posts
    4

    Default Selling 2010 PRS Alpha 144x72x24 w/ 4hp HSD

    We are preparing to post our PRS Alpha machine on our University Surplus site. (I'll let you know when it goes live). I was trying to establish a starting bid price and thought I might ask the group.

    The machine has been lightly used (light to moderate use over about 3 years total). We have a second shopbot 48 x 96 with a tool changer that gets most of the use so the decision was made to sell this one.

    Through our University Surplus it would come listed as shown and the buyer would be responsible for any auction fees and shipping/pick-up.
    I asked Shopbot about PartWorks transfer and they said the buyer would have to contact Vectric and ask for a transfer (estimate $150).

    I know these units depreciate a fair bit. I will list the specs and the original price below.
    Let me know if you have any questions/feedback and thanks for the help!

    Specs as shipped new:

    PRSalpha144-72-24
    zzero
    dust skirt and hoses
    prox kit
    PartWorks Software

    Control Box 1 Spin Dom 2.2 - 5HP
    11 0v 1 Phase, 230v 3 Phase

    HSD 4HP 230V 3PH PRS
    Alpha PO957
    24Von Board

    $33,000 no tax shipped
    $30,000 minus crate and shipping

    Yaskawa V7-4X drive.jpgShopbot spindle mfg plate.jpgShopbot info panel sticker.jpgShopbot left end view with hose.jpgShopbot front view.jpg

  2. #2
    Join Date
    Nov 2021
    Location
    Bellingham, WA
    Posts
    4

    Default

    I forgot to mention that we are required to sell through our University Surplus, otherwise I could have posted it officially for sale here.

  3. #3
    Join Date
    Mar 2013
    Location
    Memphis TN
    Posts
    940

    Default

    That is one big machine! From what I've seen as asking prices on this forum, you're looking at about 50% depreciation at least, probably more since the machine is 10+ years old. You will probably have a difficult time selling such a monster but someone will want it. If you're using an auction, you might want to put the reserve at $12k or so.
    ShopBot Details:
    2013 PRS Alpha 96x60x12
    4hp Spindle
    12" indexer
    Aspire
    Rhino
    Fusion 360
    Ferrari 360
    Prusa MK3S+

  4. #4
    Join Date
    Nov 2021
    Location
    Bellingham, WA
    Posts
    4

    Default

    Many thanks coryatjohn,
    That is a great starting point.
    I will make sure to add the surplus link to the forum once I get it posted.

    Cheers

  5. #5
    Join Date
    Oct 2019
    Posts
    1

    Default

    Very interested, if it hasn't been sold yet...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •