Results 1 to 4 of 4

Thread: PRT Indexer Post Processor for Aspire

  1. #1
    Join Date
    Jun 2001
    Location
    Austin, TX
    Posts
    434

    Default PRT Indexer Post Processor for Aspire

    I need an indexer post processor for Aspire which wraps the Y Axis. The one I have says it will wrap either the X or Y but there seems no place to choose the axis. I have not used the rotary since Aspire 10.5 and I am feverishly trying to get a job out. Help!

  2. #2
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,814

    Default

    Hey Wayne, see if one of these works for ya.

    https://www.shopbottools.com/files/R...d%20Aspire.zip
    Scott

    "It’s easier to fool everyone than it is to convince them they've been fooled" - Mark Twain





  3. #3
    Join Date
    Jun 2001
    Location
    Austin, TX
    Posts
    434

    Default

    I can’t open those now but if they came from the shopbot website they are all for indexers with tool changers.

  4. #4
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,814

    Default

    If you don't have a tool changer, it should proceed manually with prompts. I've got old versions going way back and I don't see one specifically for "Wrap Y" in the PostP/Wrapped/Shopbot folder. You could also edit the one for X to use Y instead.
    Scott

    "It’s easier to fool everyone than it is to convince them they've been fooled" - Mark Twain





Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •