Results 1 to 3 of 3

Thread: WTB: Buddy 48 or PRS 48x48

  1. #1
    Join Date
    Nov 2013
    Location
    Thornton, PA
    Posts
    115

    Default WTB: Buddy 48 or PRS 48x48

    As the title says, looking for a Shopbot Buddy 48” or a PRS 48x48. Prefer a newer model as well as spindle. Power stick with the buddy is a huge plus. Located in the Philadelphia area but certainly open to shipping

    Thanks all,
    Andrew

  2. #2
    Join Date
    Nov 2013
    Location
    Thornton, PA
    Posts
    115

    Default

    Edit: Also good with a PRS 4x8 as well, standard or alpha would be fine. Huge plus for vac holdown system that will work with single phase 240V power.

  3. #3
    Join Date
    Mar 2011
    Location
    Aurora, Indiana
    Posts
    17

    Default

    I have a 4x8 PRS Standard, 2007 3Hp spindle.
    Planned to use the 4x8 in retirement and sell a 5x12, but the 5x12 is the production and I need the room so the 4x8 has to go.
    I am 30 minutes west of Cincinnati. 4x8 can be moved out of the shop I one piece. 4 zone table with a Fein Vacuum 120v.
    Last edited by Kworks; 01-15-2022 at 04:34 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •