I'm moving and need to sell my Shopbot PRT 96 with V4G control box, Porter Cable router, upgraded both X and Y axes with e-chain for all cabling. Cutting area is 4'x8'. Originally I used it to cut forms for building canoes. It wasn't used that much over the years, collecting dust for about 5 years and then I fired it up to do that last project (milling knee braces for a timber frame home). Dust foot isn't shown in the pictures since I removed that for the last project.
I believe it is a 2006 machine. I bought it used in 2008 and brought it back from central California. Includes the control computer that runs the machine (shown in pictures). Located in N. Utah. Machine is setup and running if you're in the neighborhood and would like to see it in action or you can go here: https://youtu.be/x0QZ-n_Yp4o.
ShopBot PRT 96 V4G
Reply With Quote
