This is a machine made about 2,009 or 2010, it was as shopbot was transitioning from prt to prs. It was in a warehouse for five years before I got it. I have upgraded everything so this is definitely a prs. The Z travel is 18" I have modified the bed with extruded aluminum so that the way it's set up now has a 4-inch Z, since I am mostly cutting three-quarter inch material the spindle being closer to the bed makes for a much better cut. Included is a black box hurricane with all the piping needed and a 96 bye 54 inch HDPE plenum. The spoiled board and underneath it can easily be removed to provide access do the extruded aluminum framing below. Parts can be removed or added to make this machine any configuration you would like. If you look at the photos you can see that there's much more metal added to legs and bed of the machine, it's a very sturdy machine. There are more parts not shown. here is a lenk to some photos,Please send me an email and I will send them https://photos.app.goo.gl/yUMYB4CA7LzDsL9s5 And any questions.
Jeff
239 352 9663
jeffwoodwork@gmailcom
$35,000