Results 1 to 2 of 2

Thread: Machining Teflon

  1. #1
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    964

    Default Machining Teflon

    I need to make a small teflon part. The part will be .75" th. x 3" dia.
    I have two questions;
    1. are there different types of teflon?
    2. where can I get a small supply of teflon?
    I'd appreciate any tips on machining teflon.
    Thanks in advance.

    Phil
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 2004
    Location
    iBILD Solutions - Southern NJ
    Posts
    7,986

    Default

    Hey Phil,
    Teflon is PTFE. A 2 flute o-flute is best - don't be afraid to jack the RPM up 18k, 1 to 1.5 IPS. Its self lubricating, and of course very slippery. Your biggest challenge will be holding it down. I would even recommend a downcut spiral O , which i almost never use on plastic... but that'll help it stay put. You can get what you need from McMaster.

    Edit: old post but relevant to those who need to know.
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •