Hieverone. Has anyone else run into this.Using the new version 3 I Fluted 16 1x8sx9ft with 6 futes in each one. flutes were 8ft long. I put the flutes at 1.5, 2.5, 3.5, 4.5, 5.5, and 6.5 one y axis. What I got was 1 1/2, 2 3/8, 3 1/2, 4 3/8, 5 1/2, 6 3/8.It caused uneven flutes.
When I check how far the bot move manually it measures correctly. Here is the file.
mz,.15
j2,12,1.5
mz,-.25
m2,96,1.5
mz,.15
j2,96,2.5
mz,-.25
m2,12,2.5
mz,.15
j2,12,3.5
mz,-.25
m2,96,3.5
mz,.15
j2,96,4.5
mz,-.25
m2,12,4.5
mz,.15
j2,12,5.5
mz,-.25
m2,96,5.5
mz,.15
j2,96,6.5
mz,-.25
m2,12,6.5
mz,.15