Results 1 to 2 of 2

Thread: V-carve problems

  1. #1
    Join Date
    May 2007
    Location
    Harrisville, Utah
    Posts
    15

    Default V-carve problems

    I'm using Partworks to V-carve some lettering on small box lids and having problems with lettering size and placement. I have the artwork looking the way I want it but when I cut it the letters are shifted right and are smaller. Anyone have some ideas where I start chasing this problem down?

  2. #2
    Join Date
    Oct 2000
    Location
    Atlanta GA
    Posts
    1,499

    Default

    You might not be zero'd where you need to be. The toolpath will match the PartWorks preview. I'd check the machine's X and Y positions and the Z-zero height. Letters too small may simply be that the bit is not carving deep enough.

Similar Threads

  1. v-carve ??
    By capj209 in forum Troubleshooting
    Replies: 4
    Last Post: 07-13-2015, 04:44 PM
  2. v carve engraving problems
    By wegner81 in forum ShopBotter Message Board
    Replies: 9
    Last Post: 11-11-2014, 12:07 PM
  3. My first V-Carve and texture carve
    By PNast in forum Folder 2013
    Replies: 3
    Last Post: 05-28-2013, 08:51 AM
  4. V-carve problems. Please HELP!
    By relic_hunter in forum Sign Making
    Replies: 8
    Last Post: 05-01-2010, 10:06 AM
  5. Anyone have any of these problems in v carve pro?
    By knight_toolworks in forum VCarvePro and PhotoVCarve
    Replies: 7
    Last Post: 04-27-2007, 07:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •