When I first got my machine I had to manually turn the output switch 1 on to get the router going. During the many upgrades I installed one of them upgraded the part wizard to add lines to turn the router on and off. I had a computer crash and now I can't get the pw2 file to have these lines in them any longer. What do I have to do to get this in the partwizard. I am sure it was one of the SB3 upgrades that had fixed this in the past but I did not go through all of them sequentially to get this reloaded. I went from the initial install disc to the 3.4.19 upgrade. I did not install all versions between.

This is the lines I am refering to:
'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN INCHES
IF %(25)=1 THEN GOTO UNIT_ERROR