The saga continues.....
#1) "Training CDs" showed V21 and V22 being real close to one another until the machine "TREE"!!!!! Not a happy camper here. CDs are VERY lite with instructions/operation of the machine "TREE".
#2) Faxed the "Post Processor Request Form" to BobCad for a V22 Post Processor going to a ShopBot. There is a V21 Post Processor for ShopBot available, and with this, in hopes of their creating a V22 Post Processor should not take too long.
#3) I have reverted back to V21 BobCad running the Fanuc6M Post with no bells/whistles to get up and running. I only set the depth of cut and then "Auto" the rest of the tool path. So far all 2D tool path and will try some 3D stuff tonight.
I lean towards my lack of experience being the root cause of my problems. BobCad has worked well for me feeding my "Home-Built" CNC. I look forward to the BobCad V22 "Post Processor" for the ShopBot. If anyone could offer up a more layman's explanation of the BobCad V22 machining TREE I would greatly appreciate it.
Thanks,
Bill